Learn how to connect your sensors to the Water Module
The Water Module can also support integration via API, 4G, or 5G.
In this case, please contact Sinay Technical Support who will proceed to the configuration of your Water Module parameters.
Please email us at support@sinay.fr with the following informations:
- The technical data sheet of the sensor used with the model, version, and connection means.
- As well as an example of the data format.
Important note: calibration and setup of the sensor
Before connecting any sensor to our app, please make sur that the sensor is already calibrated.
Connecting to the Data
The transmission is done by GPRS on an FTPS site every 10 minutes.
Example:
|
Station |
Folder |
Detail |
|
Station 1 |
89C025_1_SYS.txt |
System voltage information |
|
89C025_1_sonde.txt |
Biogeochemical data |
|
|
89C025_1_ADCP_AVG .txt |
Power data |
|
|
Station 2 |
89C025_1_SYS.txt |
System voltage information |
|
89C025_2_sonde.txt |
Biogeochemical data |
|
Data Format
The main fields to use to display your data in the Water Module are:
|
Folder |
Field |
Types |
Info |
SINAY Indicator |
|
89C025_N_ADCP_AVG_dateheureenvoi.txt |
TIMESTAMP |
YYYY-MM-DD HH:MM:SS |
Date Time UT timestamp data |
Calculation of the norm of speed and direction with Vn and Ve Speed_cell 1 (bottom) and cell 8 (surface) |
|
RECORD |
Integer |
Registration number |
Using TIMESTAMP to time-stamp web site data Direction_cell 1 (background) and cell 8 (surface) |
|
|
Heading |
float |
Heading |
|
|
|
Pitch |
float |
Pitch |
|
|
|
Roll |
float |
Roll |
|
|
|
Vu (1 to 20) |
float |
Vertical velocity component/cell [m/s]. |
Take only the results of cells 1,8 and 15 |
|
|
Vn (1 to 20) |
float |
Vertical velocity component/cell [m/s]. |
Take only the results of cells 1,8 and 15 |
|
|
Ve (1 to 20) |
float |
Vertical velocity component/cell [m/s]. |
Take only the results of cells 1,8 and 15 |
|
|
Amp1(1 to 20) |
Integer |
beam amplitude 1 /cell |
|
|
|
Amp2(1 to 20) |
Integer |
beam amplitude 2 /cell |
|
|
|
Amp3(1 to 20) |
Integer |
beam amplitude 3 /cell |
|
|
|
89C025_N_Sonde_dateheureenvoi.txt |
TIMESTAMP |
YYYY-MM-DD HH:MM:SS |
Date Time UT timestamp data |
Using TIMESTAMP to time-stamp website data |
|
RECORD |
Integer |
Registration number |
|
|
|
Temp |
Float |
Saturation temperature probe (°C) |
Temperature |
|
|
Cond |
Float |
Sensor conductivity (mS/cm) |
|
|
|
Pres |
Float |
Sensor pressure (db) |
|
|
|
Sal |
Float |
Sensor salinity (PSU) |
|
|
|
Oxy1 |
Float |
Oxygen in mg/l |
|
|
|
Oxy2 |
Float |
oxygen in % saturation |
|
|
|
Turb |
Float |
Turbidity in ntu |
Turbidity in ntu |
|
|
89C025_N_SYS_dateheureenvoi.txt |
TIMESTAMP |
YYYY-MM-DD HH:MM:SS |
Date Time UT timestamp data |
|
|
RECORD |
Integer |
Registration number |
|
|
|
Batt volt |
Float |
Voltage |
Alarm if below 11.5V Supply voltage |
|
|
PTemp |
Float
|
Temperature |
|
|